Manual mode
Flame height and Fan speed.
The
mode allows setting the temperature at any level.
To select Manual mode, firstly the thermostat must be turned on, then press
and release the ‘
’ button until
appears on the display.
The flame height and fan speed are linked for safety purposes and are not
independently adjustable. The flame height and fan speed are set by the
thermostat according to the difference between the set temperature and the
current temperature. They are automatically controlled by the thermostat in
the program cycle.This will vary according to the selected temperature and
the actual room temperature.
manual
A/M
MANUAL
Adjusting the temperature.
In the
mode, adjust the set temperature by pressing or releasing
the ‘
or ‘
’ buttons. Press and hold the ‘
’ or ‘
’ buttons
to increase or decrease the temperature by 1°C every 0.5 seconds.
manual
UP’
DOWN
UP
DOWN
Automatic mode.
To correctly operate in
mode, the time and day of the week
must be set.
Manually overriding the set program.
The
mode allows the temperature to be regulated according to a
programmed level and time.
With the thermostat on, press and release the ‘
’ button until the word
AUTO appears on the LCD.
The thermostat will now operate according to the program set for the
current time period. Programming instructions are found on page 10.
At any time, the temperature or fan speed may be adjusted up or down
similar to operating in
mode.
However, whenever the thermostat changes to a new time period, the
temperature will be
automatically according to that period’s setting.
automatic
A/M
manual
reset
automatic
Page 9.
Programming
Each day of the week can be programmed individually for periods P1, P2,
P3, and P4, making a total of 28 programmed periods.
Alternatively, a weekday program can be set, so the same program is used
for Monday to Friday. Similarly, a weekday program can be set for Saturday
- Sunday. The entire week can also have the same program.
Alternatively, a weekday or weekend program can be set with individual
programs for the remaining days.
The suggested period settings for each day(s) are:
Period 1 - morning (Wake up)
Period 2 - daytime (Away)
Period 3 - evening (Coming home)
Period 4 - night time. (Sleep)
With the thermostat off, press and hold the ‘ ’ button for 2 seconds or longer
to initiate programming. The LCD will display
and the time at
which the thermostat is currently set
will flash.
Period 1 can now be set.
To begin programming.
PROG, Pd
MO
P
Setting the day of the week.
You must choose which day(s) of the week you wish to program.
Press and release the ‘
’ or ‘
’ button to change the day of the week
to the following or previous day. Press and hold the ‘
’ or ‘
’ button
for 2 seconds or longer to increase or decrease the day of the week by
1 day every 0.5 seconds.
The order that you can scroll through the days is as follows:
UP
DOWN
UP
DOWN
To accept the selected day(s) of the week press ‘
’.
OK
Page 10.
MO>TU>WE>TH>FR>MO TU WE TH FR>SA>SU>SU SA>MO TU WE TH FR SA SU
