background image

Power Flue

Cannon

FITZROY INBUILT

OPERATION  INSTRUCTIONS

SERVICE INSTRUCTIONS

Gmk10030

AS4553:2008

This heater is approved for use with 

Please leave instructions with the owner

Part  No:  F3045
Revision  P - 2010

Cannon

For service to this appliance  or spare
parts contact the CANNON distributor:

email: [email protected]

Sampford IXL (spare parts)

Phone: 1300 727 421
Fax:

1300 727 425

FITZROY INBUILT

Natural and Propane gases.

DON’T RISK YOUR APPLIANCE WARRANTY

ONLY A LICENSED PERSON WILL GIVE YOU A COMPIANCE
CERTIFICATE, SHOWING THAT THE WORK COMPLIES WITH
ALL THE RELEVANT STANDARDS.

AND ONLY A LICENSED PERSON WILL HAVE INSURANCE
PROTECTING THEIR WORKMANSHIP FOR 6 YEARS.

SO MAKE SURE YOU USE A LICENSED PERSON TO INSTALL
THIS APPLIANCE AND ASK FOR YOUR COMPLIANCE 
CERTIFICATE TO ENSURE THE MANUFACTURERS 
APPLIANCE WARRANTY WILL BE HONOURED.

Power Flue

Date installed: ...............................................................................................

Compliance Certificate No .............................................................................

Installed by: ...................................................................................................

INSTALLATION NOTES

PLEASE READ THIS MANUAL 

BEFORE INSTALLING 

THIS HEATER.

28

COPY RATING LABEL HERE

INSTALLATION INSTRUCTIONS

The  Cannon  appliance  is  warranted  against  defects  in  materials  and  

Warranty service, which includes parts and labour for the replacement or
repair of defective parts, is available through the CANNON distributor.
(Details below or on page 24).

Consumers are responsible for service person’s travel outside normal 

service areas (approximately seventy (70) kilometer radius from the nearest 

Cannon dealer’s location), local transport costs, or any preventative 
maintenance works as described in 

Any product subjected to misuse, abuse, negligence, accident or alteration 
will have its warranty voided.  The defacement of serial plate will also void 
warranty.

If installation is not carried out in accordance with manufacturer’s 

instructions, this warranty may be void.

The customer must keep their “Tax Invoice” as proof of purchase of this
product and compliance certificate as proof of required installation.

workmanship for a period of two (2) years from its date of original 
purchase, applicable only for residential use in Australia.

this manual.

Enter the details of the date installed and the Compliance Certificate 
number in the appropriate area on the rear page of this manual.

Содержание Fitzroy Powerflue In-built















Отзывы: