INSTALLING THE SWIVEL HEAD
1. Locate swivel head assembly and then insert boom end post into end of the small tube of the boom assembly. (Figure 9)
2. Align hole in boom post with hole in small end tube.
3. Secure boom end with #8 screw as shown. Tighten with Phillips head screw driver by turning screw clockwise until tight.
(Figure 10)
ADJUSTING THE bOOM LENGTH
To adjust the boom length (with the boom extending away from you) rotate the boom clamps (See item # 8 on page 5)
approximately ¼ turn counter-clockwise to unlock (Figure 11) and slide the boom section to the desired position. (Figure 12)
Once in place, lock the boom clamps by rotating clockwise until tight. (Figure 13)
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
ASSEMbLy & INSTALLATION
