background image

To receive all the benefi ts for your product warranty, please fi ll out and mail the enclosed registration card. 

Please thoroughly read this user manual.

 Follow all instructions and heed all safety and cautionary notices below. Use of this downrigger is only 

permitted for persons that have read and understood these user instructions. Minors may use this product only under adult supervision.

ATTENTION:

 Your Cannon downnrigger should only be used for its intended purpose. Improper use will void the warranty and may be a safety risk.

CAUTION:

 Persons whose ability to run the downrigger or whose reactions are impaired by alcohol, drugs, medication, or other substances are not 

permitted to use this product.

THANK yOU

Thank you for purchasing a Cannon downrigger. We have designed your new downrigger to be an accurate and reliable 
tool that will enhance fi shing control and improve your ability to catch fi sh. We hope that you enjoy the use of your 
new downrigger and enjoy the benefi t of controlled depth fi shing for years to come by always following safe boating 
practices and laws wherever you are fi shing. 

This manual covers installation and the operation of your downrigger. Read this manual carefully before operating your 
new Cannon downrigger. Retain this manual for future reference. 

REMEMbER TO KEEP yOUR RECEIPT AND IMMEDIATELy REGISTER yOUR DOWNRIGGER.

LOCATING yOUR SERIAL NUMbER

Your Cannon 11-character serial number is very important. It helps to determine the specifi c model and year of manufacture. When contacting 
Consumer Service or registering your product, you will need to know your product’s serial number.  We recommend that you write the serial number 
down in the space provided below so that you have it available for future reference.

CE MASTER USER MANUAL (FOR CE CERTIFIED MODELS)

The serial number on your Cannon 
DigiTroll 10 downrigger is located on the 
bottom of the downrigger frame.

DIGI-TROLL ELECTRICAL DOWNRIGGER 

MODEL 1902315

SER NO K365 CN12345

EXAMPLE

Содержание DIGI-TROLL 10




































Отзывы: