Switch off the electricity supply before cleaning the cooker.
Clean the cooker regularly and wipe up spills soon after they occur to prevent
them from becoming burnt on. Never use biological washing powder, caustic
cleaners, harsh abrasives, scouring pads, aerosol cleaners or oven chemical
cleaners of any kind.
To move the cooker forward, open the top oven/grill door and with both hands
positioned under the roof of the compartment lift and pull forward. Replace by
pushing the cooker backwards. Check that the cooker is level. Take care to ensure that
any floor covering is not damaged.
MAIN OVEN HEAT CLEAN LININGS
The oven roof, back and side linings are coated with a special enamel which has a
continuous cleaning action. The higher the oven temperature the more effective the
action. In most cases this cleaning operation will proceed during normal cooking.
However, if roasting is done frequently, or high temperatures are not used regularly, it
may be necessary to run the oven empty at Mark 8 for about two hours.
If desired, they can be wiped with a cloth wrung out in hot soapy water followed by a
clean damp cloth.
MAIN OVEN DOOR
The inner glass panel can be removed for easy cleaning. Unscrew the two screws
securing the glass panel, taking care not to allow the glass to fall. The glass panel can
then be washed at the sink. Refit the glass panel according to the instruction on it.
Warning: The oven must not be operated with the inner glass panel removed.
COOKER FINISH
CLEANING METHOD
Vitreous Enamel
Cloth wrung out in warm soapy water.
Hotplate,
Stubborn stains can be removed with a cream,
pan supports, burner caps,
paste, liquid cleaner or by rubbing with fine steel
roasting dish,
wool soap pads.
grill pan, oven base,
Check that the cleaning agent is approved by the
inside of oven and grill
Vitreous Enamel Association.
door, grill compartment.
Paint & Anodised
Aluminium
Wash with a cloth wrung out in warm soapy water
Side trims, plinth, lid trim,
only.
door bottom trims, fascia
DO NOT USE ABRASIVES.
trim.
Aluminium
Similar to paint cleaning above.
Burner bodies.
Use a nylon brush to remove any cleaning
materials, water or dirt from the burner bodies.
26
CARE AND CLEANING
