CANGAROO LIBERA, Руководство пользователя

Страница: 14 / 89

Type Parameters
Material used to manufacture the bottle cap PP
Material used to manufacture the valve and piston Silicone
Material used to manufacture the milk container, massage pad PCTG
13
IV. BATTERY CHARGE
1.Before first time use charge the battery completely.
2.The breast pump is with a built-in battery 3.7V/ 1300 mAh.
3.Charging:
- Connect the adapter to the charging jack of the pumping mechanism.
- Insert the plug into electrical outlet of the mains supply of your home.
- We recommend you to leave the breast pump to charge completely before next use in order to prolong its battery
life.
4.Use only the charger provided with the breast pump. Do not use chargers from other products.
5.Charge the battery on time. Charge as soon as the battery indicator is with 1 bar or the indicator starts flashing.
6. During charging, the battery indicator will blink. Once the battery is fully charged, the indicator will stop flashing.
7.If you will not use the product for a long time, charge the battery completely before storing it. Then charge the
battery at least once a month to prolong its life.
8.If the battery is damaged or cannot be charged anymore, do not try to open the product by yourselves. For
consultation and repair contact the shop from where you bought the product or the importer/ distributor.
9.The battery is recyclable. If the product is damaged and cannot be used any longer, take it to an official collection
point for electronic
products’ waste, batteries, chargers. DO NOT throw the product away with the household
waste. Follow your country’s rules for the separate collection of electrical and electronic products and rechargeable
batteries. Dispose of waste of this type only at the designated places. This will be important and significant
contribution for the environmental protection and the reduction of the harmful effects of the substances contained
in batteries and electronic components on the environment and human health.
V. ASSEMBLY OF THE ELECTRIC BREAST PUMP
ATTENTION! NEVER STERILIZE, CLEAN WITH WATER OR SUBMERGE THE PUMP MECHANISM AND CHARGER IN
WATER!
Follow the product assembly figures to ensure proper assembly.
1.Step 1 (Figure 1):
Attach the piston to the upper part of the massage pad. The ends of the piston must fit tightly to
the ends of the massage pad. The shape of the piston must fit perfectly to the shape of the massage pad.
2.Step 2 (Figure 2): Attach the silicone valve to the milk container cap (C). Make sure that it is attached in the
correct position and the opening of the valve matches the support point of the container cap. Important! If the
valve is loose or is not attached properly, it will be hard to make vacuum.
3.Step 3 (Figure 3): Attach the cap (C) to the milk container and twist it clockwise. The arrow on the cap must be
aligned with the sign on the milk container.
4.Step 4 (Figure 4): Attach the massage pad with the piston to the pumping mechanism. Make sure they fit
completely tightly to each other. Then attach the milk container to the bottom part of the pumping mechanism.
They should fit tightly to each other and there not to be any space between them.
5.Step 5: With clean hands attach your size silicone insert to the massage pad. It should fit tightly to the pad.
VI. USE
•
Wash your hands thoroughly and make sure your breasts are clean. Express some milk to check that your milk ducts are
not blocked. The pump must be sterile and assembled.
•
Sit down and relax in a comfortable chair, leaning forward slightly (Use a soft and comfortable pillow as a backrest).
1.Placing the breast pump: Put the pump on your breast. The silicone breast (nipple) shield should be firmly fitted against
the breast, and the nipple should be centrally directed towards the breast pump opening. Keep the pump upright.