CANGAROO GRACE XN-D258, Руководство пользователя

Страница: 16 / 69

IV. BATTERY CHARGE
1.Before first time use charge the battery completely.
2.The supplied adapter is with type C plug.
3.The breast pump is with a built-in battery 3.7V/ 1400 mAh.
4.Charging:
-Connect the adapter to the charging jack of the pumping mechanism.
-Insert the plug into electrical outlet of the mains supply of your home.
-We recommend you to leave the breast pump to charge completely before next use in order to prolong its battery life.
5.Use only the charger provided with the breast pump. Do not use chargers from other products.
6.Charge the battery on time. Charge as soon as the battery indicator is with 1 bar or the indicator starts flashing.
7.After the battery is fully charged the indicator will stop flashing.
8.If you will not use the product for a long time, charge the battery completely before storing it. Then charge the battery
at least once a month to prolong its life.
9.If the battery is damaged or cannot be charged anymore, do not try to open the product by yourselves. For consultation
and repair contact the shop from where you bought the product or the importer/ distributor.
10.The battery is recyclable. If the product is damaged and cannot be used any longer, take it to an official collection point
for electronic products’ waste, batteries, chargers. DO NOT throw the product away with the household waste. Follow
your country’s rules for the separate collection of electrical and electronic products and rechargeable batteries. Dispose
of waste of this type only at the designated places. This will be important and significant contribution for the
environmental protection and the reduction of the harmful effects of the substances contained in batteries and electronic
components on the environment and human health.
Type Parameters
Battery capacity 1400mAh
Adapter AC100V – 240V; DC 5V, 1A
Time 120 minutes
Using time after full charge 160 minutes
Display LED
Control Touchscreen panel
Product size
Pumping mechanism: 118 x 77 x 39 mm
Pump body: 185 x 89 x 89 mm
Materials
PP – Safety Cover (stand) Pump cover, Bottle cap, Bottle ring, Pump body, Baby bottle
Silicone – Valve, Silicone piston, Nipple, Silicone massage pad
V. ASSEMBLY OF THE ELECTRIC BREAST PUMP
ATTENTION! NEVER STERILIZE OR IMMEDIATE THE PUMP MECHANISM AND TUBE CONNECTING IT TO THE PUMP BODY -
PART AT (See Figure PD). Follow the product assembly figures to ensure proper assembly.
1. Step 1: Place the silicone valve at the lower end of the pump body. Make sure that it is properly fixed around the ends
of the pump body opening intended for it. Important! If the valve is loose or not installed correctly, it will not be possible
to create a sufficient vacuum !
2. Step 2: Fix the feeding bottle to the pump body by turning the bottle gently clockwise so that the thread of the bottle
coincides exactly with the thread of the pump body
3. Step 3: Place the piston in the upper part of the pump body. Make sure that it is properly fixed around the ends of the
pump body opening intended for it.
4. Step 4: Put the protective cover on the upper side of the pump body. Press and turn clockwise to fit in the correct
position.
5. Step 5: With clean hands, insert the silicone nozzle into the pump body. As you need to make sure it is placed tightly.
Tip: If you are not going to use the breast pump, fit the protective cover.
6. Step 6: Insert one side of the connecting tube into the jack the pumping mechanism. Then insert the other side of the
tube into the pump body. Connect the second part of the tube to the second pump body. Now you can use the breast
pump.
15