Canford Panamic Series, Руководство по обслуживанию, Страница: 9 / 12

NOTE: If you are working on a new model 53-5807, a 53-5812 or 97-5011 you will see an extra bush that
covers the bottom of the Carbon Fibre do not attempt to remove the End Stops or these Bushes, carry out
the following steps by sliding the Thimble & movable Bushes to the opposite end of the Carbon Fibre you are
trying to work on.
NOTE: If the poles are old, the End Stops can seize into the Inserts and they will then need to be machined
out prior to the new End Stops being fitted. This is an operation best carried out by our skilled staff.
Page 8
end stop
Fig.16
4.3 Carefully slide Thimble and Plastic Bushes off of the Carbon Fibre length.
4.4 PUT ON SAFETY GLOVES TO PROTECT HANDS.
4.5 Wrap a small piece of P240 wet & dry sandpaper around Carbon Fibre tube and gently rub up & down
the length until splinters are removed. (see Fig. 17)
Fig.17