Canford Panamic Series, Руководство по обслуживанию, Страница: 5 / 12

Page 4
2.3 The split Bush and small shoulder Bush will slide straight off the section; the large shoulder Bush will
need prising out of the top of the Thimble with a small screwdriver (see Fig.6 ).
NOTE: Keep each set of removed Bushes together with mating Thimble. This will allow comparison with the
new Bushes and Thimble so that the correct parts are fitted to each section.
2.4
To replace the large shoulder Bush, press into top end of Thimble (see Fig.7 ).
2.5
Manipulate Bush so that the raised shoulder sits on the thread inside the Thimble
(see Fig.8 for orientation).
2.6 Slide Thimble onto carbon fibre section then slide on slotted Bush and small shoulder Bush
(see Fig.9 for orientation).
Fig.6
Fig.9
THIMBLE
APPLY PRESSURE AT
THESE POINTS
Fig.7
THIMBLE
LARGE SHOULDER
BUSH ORIENTATION
Fig.8