Cane Creek Helm MKII, Инструкция по эксплуатации

Страница: 7 / 39

6
Fork Features Overview
*WARNING: Due to wide variations in rim and tire widths, always check tire clearance before riding. Remove air and compress
the fork completely to verify at least 10mm of clearance across the complete arc of the tire and the crown.
Wheel Spacing Boost 110mm 15mm Axle Diameter
Brake Connection Post Mount
180mm Minimum
Rotor Size
Brake caliper specific adapter
needed for larger rotors.
Axle to Crown
Measured at 160mm travel
(Axle to crown will change
proportionally to travel change)
553mm for 27.5 573mm for 29/27.5”+
Tire Clearance
Maximum Tire Size
Helm 27.5 Air & Coil
*65mm wide by 714mm tall.
Tire Clearance
Maximum Tire Size
Helm 29”/27.5+ Air & Coil
*29” 64mm wide by 749mm tall.
*27.5+” 75mm wide by 739mm tall
Air Pressure
Both 27.5” and 29/27.5+
Minimum = 30psi Maximum = 150psi Recommended Sag 15-25%
Coil Spring Rates
Minimum = Extra Soft
35lb Spring (Red)
Soft 45lb spring
(Black)
Medium 55lb
spring (Green)
Maximum = Firm
65lb Spring (Blue)
Spring Specifications
Damping Adjustments
*Count of adjuster positions may vary with some fork builds. The range of adjustment will remain the same.
Internal Adjustments
Fork Chasis Information
Compression Low Speed 10 Positions
Compression High Speed 10 Positions
Rebound Low Speed 10 Positions
Volume Reduction Indexed 8 Positions
Air Travel
Adjustment
27.5 Air
Indexed System
(up to 7) 10mm Travel
Reducers
170mm-100mm travel positions are
possible with the use of (up to 7)
10mm travel reducers
Air Travel
Adjustment
29/27.5+ Air
Indexed System
(up to 6) 10mm Travel
Reducers
160mm-100mm travel positions are
possible with the use of (up to 7)
10mm travel reducers
Coil Travel
Adjustment
Both 27.5” and 29/27.5+ Coil
Indexed System
(4) 10mm Increments
on compression rod
160mm-130mm travel positions are
possible with accessory-free travel
adjustment rod