Cane Creek Helm MKII, Инструкция по эксплуатации

Страница: 20 / 39

19
Air Internal Travel Adjustment
Cane Creek Helm fork travel is preset
from the factory, but travel can be
changed internally in 10mm increments
if desired. Two travel reducers are
included with every HELM fork.
(Additional travel reducers can be purchased in
packs of 2, Cane Creek part number BAG0392 .)
Tools required:
• 13mm Wrench
• 18mm Wrench
• Pick Tool
• Travel Reducers
WARNING: READ ALL STEPS BEFORE PERFORMING TRAVEL
ADJUSTMENT Follow these steps carefully to avoid foul assembly, warranty void,
or serious injury. If you do not feel confident performing this procedure, contact
a professional bike mechanic or a Cane Creek authorized Service Center. *For a
detailed step by step video of this process, visit www.canecreek.com
Clean the entire fork before performing
a travel adjustment to ensure no dirt
enters the lowers during reassembly.
Dirt in the lowers can cause damage to
the seals and stanchions.
1. Remove air cap from top of fork,
remove charge air cap off bottom of
fork, unthread air charge button on
bottom of fork.
1.
Travel Reducers