4.3 Aquactiva Function
5. After 30 minutes switch off the program and allow the oven to cool down.
The Aquactiva procedure uses steam to help remove remaining fat and food particles from the oven.
Use distilled or drinkable water.
Warning: Make sure that the appliance is cool before you touch it.
2. Set the oven function to Static ( )or Bottom ( )heater
3. Set the temperature to the Aquactiva icon
1. Pour 300 ml of water into the Aquactiva container at the bottom of the oven.
Care must be taken with all hot surfaces as there is a risk of burns.
4. Allow the program to operate for 30 minutes.
6. When the appliance is cool, clean the inner surfaces of the oven with a cloth.
2. To clean the wire racks either put them in the dishwasher or use a wet sponge, ensuring that they are dried afterwards.
3. After the cleaning process install the wire racks in reverse order.
INSTRUCTION FOR REMOVAL AND CLEANING OF THE SIDE RACKS
1. Remove the wire racks by pulling them in the direction of the arrows (see below)
4.4 Maintenance
REMOVAL OF THE OVEN WINDOW
1. Open the front window.
2. Open the clamps of the hinge housing on the right and left side of the front window by pushing them downwards.
3. Replace the window by carrying out the procedure in reverse.
A
EN 1
1
300 ml
