Candy FCTS886XL WIFI, Инструкция пользователя

Страница: 2 / 110

General Warnings
• During cooking, moisture may condense inside
the oven cavity or on the glass of the door. This is a
normal condition. To reduce this effect, wait 10-
15 minutes after turning on the power before
putting food inside the oven. ln any case, the
condensation disappears when the oven reaches
the cooking temperature.
• Cook the vegetables in a container with a lid
instead of an open tray.
• Avoid leaving food inside the oven after cooking
for more than 15/20 minutes.
• WARNING: the appliance and accessible parts
become hot during use. Be careful not to touch
any hot parts.
• WARNING: the accessible parts can become hot
when the grill is in use. Children should be kept at
a safe distance.
• WARNING: ensure that the appliance is
switched off before replacing the bulb, to avoid
the possibility of electric shocks.
• WARNING: in order to avoid any danger caused
by the accidental resetting of the thermal
interruption device, the appliance should not be
powered by an external switching device, such as
a timer, or be connected to a circuit that is
regularly switched on and off.
• Children under 8 should be kept at a safe
distance from the appliance if not continuously
supervised.
• Children should not play with the appliance.
• The appliance can be used by those aged 8 or
over and by those with limited physical, sensorial
or mental capacities, without experience or
knowledge of the product, only if supervised or
provided with instruction as to the operation of
the appliance, in a safe way with awareness of the
possible risks.
• Cleaning and maintenance should not be carried
out by unsupervised children.
• Do not use rough or abrasive materials or sharp
metal scrapers to clean the oven door glasses, as
they can scratch the surface and cause the glass to
shatter.
• The oven must be switched off before removing
the removable parts. After cleaning, reassemble
them according the instructions. • Only use the meat probe recommended for this
oven.
• Do not use a steam cleaner for cleaning
operations.
I F T H E O V E N I S P R O V I D E D B Y T H E
MANUFACTURER WITHOUT PLUG:
• THE APPLIANCE MUST NOT BE CONNECTED TO
THE POWER SOURCE USING PLUG OR SOCKETS,
BUT MUST BE DIRECTLY CONNECTED TO THE
SUPPLY MAINS. The connection to the power
source must be carried out by a suitably qualified
professional. In order to have an installation
compliant to the current safety legislation the
oven must be connected only placing an
omnipolar breaker, with contact separation
compliant to the requirements for overvoltage
category III, between the appliance and the
power source. The omnipolar breaker must bear
the maximum connected load and must be in line
with current legislation. The yellow-green earth
cable should not be interrupted by the breaker.
The omnipolar breaker used for the connection
must be easily accessible when the appliance is
installed.
• The connection to the power source must be
carried out by a suitably qualified professional
considering the polarity of the oven and of the
power source.
• The disconnection must be achieved
incorporating a switch in the fixed wiring in
accordance with the wiring rules
I F T H E O V E N I S P R O V I D E D B Y T H E
MANUFACTURER WITH PLUG:
• The socket must be suitable for the load
indicated on the tag and must have ground
contact connected and in operation. The earth
conductor is yellow-green in colour. This
operation should be carried out by a suitably
qualified professional. ln case of incompatibility
between the socket and the appliance plug, ask a
qualified electrician to substitute the socket with
another suitable type. The plug and the socket
must be conformed to the current norms of the
installation country. Connection to the power
EN 02