Candy COOKER HOOD, Инструкция пользователя

Страница: 20 / 64

if key D is pressed the “ clean air ” function is deactivated and
the motor moves to the 2nd speed straight away. By pressing
key
B
the function is deactivated).
• Active carbon/grease filter saturation:
- When button
A
flashes at a frequency of
2 seconds
, the
grease
filters must be cleaned.
- When button A flashes at a frequency of 0.5 seconds , the
carbon filters must be replaced.
After the clean filter has been replaced, the electronic memory
must be reset by pressing button
A
for approximately
5
seconds
, until the light on the button stops flashing.
• Commands: (fig.9 B) mechanical the key symbols are
explained below:
A
= LIGHT
B = OFF
C = SPEED I
D
= SPEED II
E
= SPEED III
G = MOTOR WORKING indicator
• Replacing halogen light bulbs (Fig. 10).
To replace the halogen light bulbs
B
, remove the glass pane
C using a lever action on the relevant cracks.
Replace the bulbs with new ones of the same type.
Caution:
do not touch the light bulb with bare hands.
• Replacing incandescent light bulbs (Fig. 11).
To remove the incandescent light bulb, take out the grease
filters as described in (Fig. 6) and remove the bulb.
Replace it with a new one of the same type (Fig. 11).
CUSTOMER ASSISTANCE SERVICE
Before contacting the Technical Assistance Service:
If the product does not operate at all, we advise you to:
- check that the plug has been inserted into the power socket
correctly.
If you cannot identify the cause of the operating anomaly:
switch off the appliance (do not subject it to rough treatment)
and contact the Assistance Service.
PRODUCT SERIAL NUMBER. Where can I find it?
It is important that you inform the Assistance Service of your
product code and its serial number (a 16-character code which
begins with the number 3); this can be found on the guarantee
certificate or on the data plate located inside the appliance.
This will help to avoid wasted journeys being made by
technicians, thereby (and most significantly) saving the cor-
responding callout charges.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY
FOR EVENTUAL DAMAGES CAUSED BY BREACHING THE
ABOVE WARNINGS.
- 20 -