Candy CIES55MCTT/1, Инструкция по эксплуатации

Страница: 10 / 128

automatically within 10s if the water flow to the control panel, while buzzer will
spillage protection is a safety protection function. It switch off the hob - Over
spillage Protection - Over
automatically. operation
Induction hob will stop hob. When an excessive temperature is monitored, the
Induction the inside temperature the monitor can equipped sensor temperature A
Temperature Protection - Over
but you shall unlock the hob first in the next operation.
emergency, an in control ON/OFF the with off hob induction the turn always can you
,
ON/OFF the except disable are controls the all mode, lock the in is hob the When
on). accidentally turning the cooking zones
You can lock the controls to prevent unintended use (for example children
• When the controls are locked, all the controls except the ON/OFF control are
disabled.
To lock the controls
Touch the keylock control. The timer indicator will show “ Lo “.
To unlock the controls
1. Make sure the Induction hob is turned on.
2. Touch and hold the keylock control for 3 seconds
.
3. You can now start using your Induction hob.
•
Controls Locking the
button will disappear.
then touch the flex zone selection button, the indicator next to the flex zone
flex zone, touch the slider of the heating zone again, 1. If you want to cancel the
As two independent zones
level. adjust the power
” to — ” control, or just touch any point of the “ — Touch the slide along the “ 2.
18 - EN EN-17
2. Touch the button Pause function, the cooking zone indicator will show “ll”.
And then the operation of the induction cooktop will be deactivate within the scope
of all cooking zones, except the Pause, on/off and lock keys.
3. To cancel the pause status, touch the Pause function, then the cooking zone
will go back to the power stage which you set before.
Flex Zone
•
This area can be used as a single zone or as two different zones, accordingly to
the cooking needs anytime.
•
Flexible area is made of two independent inductors that can becontrolled
separately.
• Important: Make sure to place the cookwares centered on the single cooking
zone. In case of big pot, oval, rectangular and elongated pans make sure to place
the pans centered on the cooking zone covering both cross.
Examples for good and bad pot placements:
As big zone
1. Touch the slider of the heating zone (left side) that you wish to go into
flexizone, then touch the flex zone selection button to activate the flexible
area as a single big zone, the indicator next key will be on.