EN-11
Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the
ceramic
hob.
When
a
n excessive temperature is monitored, the ceramic hob will stop
operation automatically.
Over-spillage Protection
Over
-
spillage protection is a safety protection function. It switch off
the
hob
automatically
within 10s
if
the water flow to the control pa
n
el, while buzzer will
b
eep 1
second.
Residual Heat Warning
When the hob has been operating for some time,
there will be some residual
heat.
The letter “
H
”appears to warn you to keep away from it.
Auto Shutdown
Auto shut down is a safety protection fun
c
tion for your
ceramic
hob. It shut down
automatically if ever
you forget to turn off your cooking. The default working times
for various power levels are shown in the
below table:
Power level
1
2
3
4
5
6
7
8
9
Default working timer (hour)
8
8
8
4
4
4
2
2
2
Using the Timer
You can use the timer in two different ways:
• You can
use it as a minute minder. In this case, the timer will
not turn any
cooking zone off when
the set time is up.
• You can set it to turn one cooki
ng zone off
or more than one
after the set time is
up.
•
You can set the timer for up to 99 minutes.
Using the Timer as a Minute Minder
If you are not selecting any cooking zone
1.
Make sure the cooktop is turned
on
.
Note: you can use the minute mi
n
der even
if you’re not selecting any cooking
zones.
2.
Touch timer
control
,
t
he minder indicator will
start
fla
shing and “3
0”
will show in the
timer display.
EN-12
3.
Set t
he time by touching the
“-” or “+” control
Hint: Touch the
“-” or “+
” control of the ti
mer
once to
de
crease or in
crease by 1 minute.
Touch and hold the “
-” or “+”
control of the timer to
de
crease or
in
crease by 10 minutes.
If the setting time exceeds 99 minutes, the timer will automatically
return to 0 minute.
4.
Cancel the time by touching
the
timer control a
nd
the”
00”
will show in the
minute
display.
5. When the time is set, it will begin to count down
immediately.
The display will show the remaining
time and the timer
indicator will flash for 5 seconds.
6. Buzzer will b
ee
p for 30 seconds and the timer
indicator
shows
“- -”
when the set time finished.
Setting the timer to turn one cooking zone off
Cooking zones set for this feature will:
1.
Touching the heating zone selection control
that you want
to set the timer for.
(e.g. zone
1
#)
2.
Touch timer
control
,
t
he minder
indicator will
start flashing
and “
30”
will show in the timer display.
3.
Set the time by touching the “
-” or “+” control
.
Hint: Touch the
“-” or “+
” control of the timer
once will
de
crease or in
crease by 1
minute.
Touch and hold the
“-” or “+”
control of the timer will de
crease or
in
crease by 10 minutes.
Содержание CHEDD30CTT/1
Страница 24: ......
