6
3. Drill 5
φ
8mm holes on a suitable place to accommodate the hook and inside
chimney bracket once the installation height is fixed, and keep it in line. The fixed
position of the inside chimney bracket is the highest place of the inside chimney.
See pic 2.
4. Screw and tighten the hook onto the wall with the 3pcs screws (4mm x 40 mm) and
wall plugs provided.Then use 2 pcs ST4*40mm screws to fix the inside chimney
bracket.See pic 2.
5. Install the expansion pipe
(not included
)and converter on the air outlet.Note: the
expansion pipe is not included in the product.See pic 3.
Pic3
6. Fix the outside chimney bracket on the outside chimney, and be sure that the inside
chimney can be adjusted the height in it freely.See pic 4.
