C&S Controls LaserLight 2 Series, Техническое руководство

Страница: 5 / 37

2 LaserLight2 Technical Manual
1.2 Safety
Safety Symbol Definitions
Indicates a potentially hazardous situation that, if not avoided, could result in serious injury or death, and
includes hazards that are exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided may result in minor or moderate injury.
Indicates information about procedures that, if not observed, could result in damage to equipment or
corruption to and loss of data.
General Safety
Do not operate or work on this equipment unless you have read and understand the instructions and
warnings in this Manual. Failure to follow the instructions or heed the warnings could result in injury or
death. Contact any Rice Lake Weighing Systems dealer for replacement manuals. Proper care is your
responsibility.
Failure to heed may result in serious injury or death.
Some procedures described in this manual require work inside the indicator enclosure. These procedures are to be
performed by qualified service personnel only.
Do not allow minors (children) or inexperienced persons to operate the LaserLight2.
Do not place fingers into slots or possible pinch points.
Do not use any load-bearing component that is worn beyond 5% of the original dimension.
Do not use this product if any of the components are cracked.
Do not exceed the rated load limit of the unit.
Do not make alterations or modifications to the unit.
Do not remove or obscure warning label (Figure 1-1).
Before opening the unit, ensure the power cord is disconnected from the outlet.
Test the operation of the ground fault circuit interrupter each time the sign is plugged in (UL version
only). To test the GFCI, plug in the LaserLight2 and press the TEST button. The LaserLight2 should
immediately turn off. If it does not, either the GFCI is mis-wired, a wiring problem in the same circuit or
the GFCI has malfunctioned and should be replaced. Pressing the RESET button will restore power to the
LaserLight2 or the circuit.
Figure 1-1. Safety Label PN 16861
WARNING
CAUTION
Important
WARNING
Important