C&S Controls LaserLight 2 Series, Техническое руководство

Страница: 24 / 37

Configuration 21
Table 3-4. Port 0 Serial Parameters
Parameter Settings Description
Level 2 Submenus
Port 0 BAUD
PARITY
DATA BITS
STOP BITS
HOLD WT
LOCK
E CHAR
LW POS
LENGTH
PRIM U
SEC U
GROS C
NET C
MOTION
SETANN
SP IND
Configure Port 0 —See Level 3 submenu parameter descriptions.
Holds the last weight displayed if communication is lost and prevents the remote display from
going into an error condition.
If enabled, prevents the Auto-Learn (Section 3.1) parameter from working and ensures settings
remain as currently set (unless manually adjusted).
Determines the end character of a packet when Auto Learn is enabled.
Determines the last weight position of the format. Select a number from 5 to 50.
Determines the length of packet in the string format.Select a number from 5 to 75.
Select primary unit characters
Select secondary unit characters
Select gross character
Select net character
Select motion status character
Select which annunicators are enabled manually. Note: Only available if the parameter, Special
Indicators is set to Mode 1 (Catch-all).
Select, decode status, and settings for special indicator type.
0 = automatic learning
1 = catch-all, semi-automatic learning
PORT 1 BAUD
PARITY
DATA BITS
STOP BITS
ECHO
LOCK
Configure Port 1. See level 3 submenu parameter descriptions.
Allows echoing between the remote display and other devices. Data settings should be set equal to
or greater than device being echoed to.
Select on to ensure the current settings are not changed and if Auto-Learn is not locked, it will
mirror the port 0 serial settings.
Port 0
Parameter Settings Description
Level 3 Submenus
BAUD 1200
2400
4800
9600
19200
Select the transmission speed.
PARITY ODD
EVEN
NONE
Select the parity of data.
DATA 7
8
Select the number of data bits.
STOP 1
2
Select the number of stop bits.
HOLD WT ON
OFF
To prevent the display from going into an error condition, select On to hold the last weight
displayed.
LOCK ON
OFF
On ensures the current settings are not changed and overrides the Auto-Learn function.
Off enables the Auto-Learn function.
If selected, the
appropriate
annunciator is lit