C&K systems SYS3316RF, Руководство по установке

Страница: 16 / 30

16 16
16 16
16
SYS3316RF Installation Manual
Command Location 2C: Opening and Closing Report Codes Command Location 2C: Opening and Closing Report Codes
Command Location 2C: Opening and Closing Report Codes Command Location 2C: Opening and Closing Report Codes Command Location 2C: Opening and Closing Report Codes
(1) (2) (3) (4)
B 1 C 1
Default Values Default Values Default Values Default Values Default Values
2 2 2 2 2 C C C C C
Digit Position (1): Opening Report Code Digit Position (1): Opening Report Code
Digit Position (1): Opening Report Code Digit Position (1): Opening Report Code
Digit Position (1): Opening Report Code
#
Valid entries are 0 - F.
The User ID # is transmitted after the opening code.
Program 0 to disable Opening Reports.
Digit Position (2): Opening Report Receiver Select Digit Position (2): Opening Report Receiver Select
Digit Position (2): Opening Report Receiver Select Digit Position (2): Opening Report Receiver Select Digit Position (2): Opening Report Receiver Select
0 = Receiver 1 with Receiver 2 as back-up
1 = Receiver 1 only 2 = Receiver 2 only
3 = Receiver 1 and Receiver 2 (Dual Reporting)
Digit Position (3): Closing Report Code Digit Position (3): Closing Report Code Digit Position (3): Closing Report Code Digit Position (3): Closing Report Code Digit Position (3): Closing Report Code
Valid entries are 0 - F.
The User ID # is transmitted after the opening code.
Program 0 to disable Closing Reports.
Digit Position (4): Closing Report Receiver Select Digit Position (4): Closing Report Receiver Select Digit Position (4): Closing Report Receiver Select Digit Position (4): Closing Report Receiver Select Digit Position (4): Closing Report Receiver Select
0 = Receiver 1 with Receiver 2 as back-up
1 = Receiver 1 only 2 = Receiver 2 only
3 = Receiver 1 and Receiver 2 (Dual Reporting)
Command Location 2D: Duress Report and Delays Command Location 2D: Duress Report and Delays
Command Location 2D: Duress Report and Delays Command Location 2D: Duress Report and Delays Command Location 2D: Duress Report and Delays
Digit Position (4): Exit Delay Time Digit Position (4): Exit Delay Time Digit Position (4): Exit Delay Time Digit Position (4): Exit Delay Time Digit Position (4): Exit Delay Time
Default Values Default Values Default Values Default Values Default Values
(1) (2) (3) (4) (5)
1 3 6 2 0
2 2
2 2
2 D D
D D
D
Digit Position (1): Duress Report Code Digit Position (1): Duress Report Code
Digit Position (1): Duress Report Code Digit Position (1): Duress Report Code Digit Position (1): Duress Report Code
#
Valid entries are 0 - F.
The User ID # will be reported as the second digit when reporting.
Program 0 to disable Duress Reports.
Digit Position (2): Duress Receiver Select Digit Position (2): Duress Receiver Select Digit Position (2): Duress Receiver Select Digit Position (2): Duress Receiver Select Digit Position (2): Duress Receiver Select
0 = Receiver 1 with Receiver 2 as back-up
1 = Receiver 1 only 2 = Receiver 2 only
3 = Receiver 1 and Receiver 2 (Dual Reporting)
Digit Position (3): Entry Delay Time Digit Position (3): Entry Delay Time
Digit Position (3): Entry Delay Time Digit Position (3): Entry Delay Time Digit Position (3): Entry Delay Time
NOTE: To program delay times greater
than 150 secs, see CL 1F - 26 &
49 - 50 Digit Position (4)
1 = 110 secs
2 = 120 secs
3 = 130 secs
4 = 140 secs
5 = 150 secs
6 = 60 secs
7 = 70 secs
8 = 80 secs
9 = 90 secs
0 = 100 secs 1 = 10 secs
2 = 20 secs
3 = 30 secs
4 = 40 secs
5 = 50 secs
1 = 110 secs
2 = 120 secs
3 = 130 secs
4 = 140 secs
5 = 150 secs
6 = 60 secs
7 = 70 secs
8 = 80 secs
9 = 90 secs
0 = 100 secs
1 = 10 secs
2 = 20 secs
3 = 30 secs
4 = 40 secs
5 = 50 secs
Digit Position (5): Audible Time Digit Position (5): Audible Time
Digit Position (5): Audible Time Digit Position (5): Audible Time Digit Position (5): Audible Time
1 = 2 min
2 = 5 min
3 = 10 min 4 = 15 min
5 = 30 min
A
B
C
D
E
F
Hexadecimal Value Hexadecimal Value
Hexadecimal Value Hexadecimal Value Hexadecimal Value Key Strokes Key Strokes
Key Strokes Key Strokes
Key Strokes
0
1
2
3
4
5
PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS PROGRAMMING CONVERSIONS
CL 2C and 2D CL 2C and 2D
CL 2C and 2D CL 2C and 2D CL 2C and 2D
NOTE: To program delay times greater
than 150 secs, see CL 1F - 26 &
49 - 50 Digit Position (4)