Candi 605 E, Инструкция по эксплуатации

Страница: 9 / 16

20
S t a r t i n g / wa r m i n g u p t h e c o f f e e m a c h i n e
•Use only capsules that are specific for this model
•Plug the coffee machine into an electrical socket
•Power the coffee machine by turning on the main switch (9)
(Fig.4)
•The buttons (A) and (B) start to blink; when they appear with
a fixed light the machine is ready for use
(Fig.4)
Mod. Energy saving function
If the machine is left switched on and is not used, after 9 minuts
the energy saving function is activated and the buttons (A) and
(B) blink every 2 seconds.
To use the machine again press one of the buttons (A) or (B)
and wait for it to heat up; when the buttons (A) and (B) appear
with a fixed light the machine is ready for use.
The coffee machine should be rinsed both at its very first use and
when it has been inoperative for a long spell of time. By performing
this quick procedure, you will ensure that all inner circuits are rinsed.
•Ensure that there are no capsules inside; power on the machine
via the main switch(on the back) (9)
• Close the small cup support (11) and place a large empty
cup under the opening for dispensing coffee/tea/beverages.
(Fig. 5)
When the buttons (A) and (B) appear with a fixed light the
machine is ready for use. Press a button (A) or (B); the machine
dispenses water, press the button again when you have obtained
the desired amount of water
(Fig. 6)
. The machine is rinsed
when at least 3 glasses of water have been dispensed.
NOTE
open the support (11) to prepare espresso coffee correctly and
to use small cups
(Fig. 7)
.
To use large cups, close the support (11) and place the cup
directly on the grid of the drip tray (5)
(Fig. 5)
Rinsing the machine/inner circuits
Fig.5
9
11
Fig.6
B
A
B
A
11
Fig.7
Fig. 4