6
3. Installation method
Put the battery into the installationsite and make sure the positive side
of the battery is in accordance with the positive side of installationsite.
(See Fig.3-5)
Please set the time corrected on the
fi
rst time operation. Batteries in
the wire controller can time under power failure which ensure the
time keep right. When the power restores, if the time displayed is not
correct, it means the battery is dead and replace the battery.
Fig 3-5
4. Battery installation
NOTE:
Put on a
fl
at surface. Be careful not to distort the
back plate of the wire controller by overtightening the
mounting screws.
