47
When the air conditioning unit is o
ff
, into the query function of
temperature, press“ ”or “ ”to select Adr, the temperature
zone will display -- or A, B. Where -- refers to the code setting
of the wirecontroller.
Press “Con
fi
rm” into setting state, press“ ”or “ ”to select ,
then press “Con
fi
rm” to complete it.
Two - line controller address selection
Restore factory Settings
-- : The code setting of the wire controller shall prevail.
: The wire controller address setting.
: Restore factory Settings .
When the air conditioning unit is o
ff
, into the query function
of temperature, press“ ”or “ ”to select INIt, the temperature
zone displayed --.
Press “Con
fi
rm” into setting state, press“ ”or “ ”to select to
"ON" , then press “Con
fi
rm” to complete it.
15.Queries and settings
