Candeo Rotary Wifi Dimmer Switch - C302-WF
Pairing to Smart Life - Method 1 (default)
1. Prepare your smart phone
i. Install the Smart Life from your app store, and create an account if you do not already have one.
ii. Ensure that you have bluetooth enabled on your smart phone.
2. Factory reset the switch as detailed above.
3. Open the Smart Life app and choose to add a new device with the (+) icon.
4. Allow the app to scan for new devices.
5. Once the new device has been discovered, select “Add”, and the (+) to add the Wifi dimmer to your
devices.
6. Rename the device as you wish, and you can now control the switch via the Smart Life app.
Setting the Minimum Brightness
1. Open the Smart Life app and select the device.
2. Turn on the light, and select the settings icon.
3. Ensure that the brightness range settings are unlocked by touching the padlock icon.
4. You can now configure the minimum brightness level for the switch.
5. Save the setting when you are ready.
Pairing to Smart Life - Method 2 (AP mode)
1. Factory reset the switch as detailed above.
2. Open the Smart Life app and choose to add a new device with the (+) icon.
3. From the left hand device options, select “Lighting” and then choose “Light Source (Wi-fi)
4. Follow the steps in the Smart Life app, indicating that the light is blnking slowly or breathing.
5. Smart Life will find the switch, and allow you to add it to your devices.
6. Rename the device as you wish, and you can now control the switch via the Smart Life app.
If connection fails using the above method, please turn off bluetooth on your phone, and follow the steps
below.
Voice control with Alexa and Google Assistant
1. To allow control with Alexa you need to enable the “Smart Life” skill in the Alexa app.
2. To allow control with Google Assistant you need to set up the “Smart Life” connection in the Google
Home app.
Factory Reset
1. To factory reset the switch press and hold the knob for 10 seconds.
2. The light will blink twice to confirm a successful reset.
