Alexandrite Long Pulse Laser 755nm-GENTAL MAX PRO
1. Prepare the electric plug.
2.Insert into the plug.
3.Switch on.
4.2 Water-cooling system
Due to the generated huge heat of the xenon lamp when do treatment, and the
treatment handle cooling the skin produce a lot of heat, so the machine needs to add a
certain amount of pure water before work.
Water added standard
：
Distilled water or purified water
（
avoid to use tap water or
mineral water, otherwise it will seriously affect the working life of the machine and the
cooling effect.
）
1.
Water tank capacity
：
15L.
2.
the shortest period of replace cooling water: three months.
3.
Cooling water filling (see 4.1.3 step)
：
a. Water monitoring program.
b. water monitored. Machine built-in flow monitoring devices. The machine
starts to work, then flow monitoring module to work. If the water monitoring
module can not feel water, the machine will automatically lock the user
interface and prompt "Water is not circulating", accompanied by sound of the
buzzer.
c. Water temperature monitoring. Machine built-in temperature monitoring
sensor, monitoring the temperature of the cooling water into the water
circulation system. The upper temperature limit is set to 50
℃
. If the cooling
water temperature reaches the set limit, the user interface is automatically
locked, and prompt "temperature too high", and accompanied by sound of
the buzzer. Machine built-in radiator module, at room temperature (25
℃
),
and operating room ventilation is good, the machine can guarantee
continuous operation. If the room temperature is too high, or operation room
ventilated effect is bad, or water filling not enough
，
after the machine working
for some time, it may reach the upper temperature limit, then alarm and stop
working. At this approach: First, Wait for the machine cooled to room
temperature. Second, change the water with normal temperature. If the
summer temperature of some certain areas is too high (above 35
℃
), the
13 / 32
