CANAWELD PLB2380148, Руководство пользователя

Страница: 9 / 32

8
SECTION 2- INSTALLATION AND OVERVIEW
INSTALLATION
ELECTRICAL
•
The serial number and rating information is located on the bottom of the machine. Use the rating labels to
determine input power requirements and rated output.
•
Check whether the voltage value variations are within the acceptable working range with a multi-meter.
•
(A) The input cable of the machine is ready to be plugged into a 230
V
10%
−
+
compatible connector / socket or
(B) you can remove the installed plug and have the input cable “hard” wired into the appropriate building
electrical panel.
•
(C) The machine is designed to operate on a 120
V
%10
−
+
voltage
, a
compatible connector can be fitted to the
input cable (D) or it can be hard wired into the electrical panel.
•
Electrical installation must meet all national and Local Codes− has only a qualified electrician does the
installation.
Please note (in the 120v setting): This welder is a
very powerful machine. It is strongly
recommended to the user to have a separate 30
(A) electrical circuit wired to the welder location
by a certified electrician.