Canature 95 Series, Инструкция по установке и эксплуатации

Страница: 10 / 28

10
Main Display
When power is first supplied, the valve may take up to two minutes to find the service posi-
tion. During this time the valve will show:
Do not touch any buttons at this time. When the valve reaches the service position it will
display:
This page shows the current time, last regeneration day, and the regeneration mode. The
number of blue bars represent the capacity remaining and the flow rate.
Change Setting Procedure
1. Press the MENU button to enter and exit the menu.
2. Press the UP or DOWN button to select the parameter.
3. Press the SET/REGEN button to enter or activate the parameter for editing.
4. Press the UP or DOWN button to change the value.
5. Press the SET / REGEN button to save the value.
6. Press the UP or DOWN button to select other parameters.
7. Follow the above steps to change other parameters.
8. Press the MENU button to save and exit settings.
You can only change flashing parameters.