Canature WaterGroup HT 565BM-100, Руководство пользователя

Страница: 4 / 36

4
READ THIS MANUAL FIRST
s Read this manual thoroughly to become familiar with the device and its capabilities before installing or operating your Water Filter. Failure to follow instructions in this
manual could result in personal injury or property damage. This manual will also help you to get the most out of your filter.
s This system and its installation must comply with state and local regulations. Check with your local public works department for plumbing and sanitation codes. In the
event the codes conflict with any content in this manual the local codes should be followed. For installations in Massachusetts, Massachusetts Plumbing Code 248 CMR
shall be adhered to. Consult your licensed plumber for installation of this system.
s This water filter is designed to operate on pressures of 30 psi to 125 psi. If the water pressure is higher than the maximum use a pressure reducing valve in the water supply
line to the filter.
s This unit is capable of operating at temperatures between 40°F and 110°F (4°C - 43°C). Do not use this water filter on hot water supplies.
s Do not install this unit where it may be exposed to wet weather, direct sunlight, or temperatures outside of the range specified above.
s Avoid pinched o-rings during installation by applying (provided with install kit) NSF certified lubricant to all seals.
s Filters are commonly exposed to high levels of iron, manganese, sulfur, and sediments. Damage to pistons, seals, and or spacers within the control valve are not covered in
this warranty due to the harsh environment.
s It is recommended to regularly inspect and service the control valve on an annual basis. Cleaning and or replacement of piston, seals, and or spacers may be necessary
depending on how harsh the conditions are. An Annual Maintenance kit (Part # 60010307) is available for this purpose
s Do not use water that is microbiologically unsafe without adequate disinfection before or after this system.
s This publication is based on information available when approved for printing. Continuing design refinement could cause changes that may not be included in this
publication. Canature WaterGroup™ reserves the right to change the specifications referred to in this literature at any time, without prior notice.
Safety Messages
Watch for the following safety messages in this manual:
NOTE:
used to emphasize installation, operation or maintenance information which is important but does not
present a hazard.
Example: NOTE:
Check and comply with you state and local codes. You must follow these guidelines.
CAUTION:
used when failure to follow directions could result in damage to equipment or property.
Example:
CAUTION!
Disassembly while under pressure can result in flooding.
WARNING:
used to indicate a hazard which could cause injury or death if ignored.
Example:
WARNING!
ELECTRICAL SHOCK HAZARD! UNPLUG THE UNIT BEFORE REMOVING THE COVER OR ACCESSING
ANY INTERNAL CONTROL PARTS
NOTE:
Do not remove or destroy the serial number. It must be referenced on
request for warranty repair or replacement