1. Turn off power at main electrical service box before starting installation.
2. Electrical connections must comply with local code ordinances or
national electrical codes.
3. Make sure the installation site you choose allows the fan blades to rotate
freely without any obstructions.
4. When mounting the fan on a ceiling outlet box, use a metal octagon box.
The outlet box and its support must be able to withstand the moving
weight of the fan (minimum of 35 lbs.).
SAFETY PRECAUTIONS
TOOLS AND MATERIALS REQUIRED
Phillips screwdriver
Blade screw driver
Step ladder
Wire cutters
Wiring supplies as required
• to reduce the risk of personal injury
DO NOT bend the blade brackets
when installing the brackets, balancing the blades or cleaning the fan.
Also,
DO NOT insert foreign objests in between rotating fan blades.
• mount only to an outlet box marked acceptable for fan support
• mount with the lowest moving parts at least 2.1 meters (6.9 feet) above
floor grade level.
•
DO NOT operate reversing switch while fan blades are in motion. Fan
must be turned off and rotating blades stopped, reverse chain pull, the
speed chain pulled again to start in the opposite direction.
WARNING
pg. 2
pg. 3
ASSEMBLY DRAWING
1. wooden joist
2. metal outlet box (not provided)
3. ceiling
4. rubber gasket
5. mounting bracket
6. outlet box screws
7. wood screws & flat washers
8. downrod
9. canopy
10. downrod set screw
11. yoke cover
12. motor assembly
13. reverse switch
14. cover
15. glass
16. blade bracket
17. blade
18. blade screws and washers
19. remote control
6
5
4
2
7
3
1
13
12
10
9
8
14
15
11
19
18
17
16
