pg. 11
7. MOUNTING BLADE BRACKETS TO BLADES TO MOTOR
INSTALLATION
NOTE:
Choice of 4 or 5 blades (option on some fans)
Some fans offer the option of four or five blade operation. In these cases there will
be two rows of screw holes in the motor casing. The inside row will contain 8 holes
for 4 blades and the outside row will contain 10 holes for 5 blade use.
• obtain hardware containing motor screws and lock washers.
• place lock washers over motor screws, position motor screws in blade
brackets,and secure to motor.
• make sure all screws are tightened securely.
NOTE:
On those fans with an extra
wide switch housing cover there will
be a cut out section provided allowing
access to screws when installing the
blade brackets.
NOTE:
Fan comes with THREE RUBBER
STOPS on motor for shipping purposes
only. Remove stops before installing the
blades to the motor.
inside holes
outside holes
motor
lock washer
motor screw
cut out section
switch housing
cover
remove rubber stops
pg. 12
8. DETACHABLE LIGHT KITS (FIXED STYLE SWITCH HOUSING)
INSTALLATION
• loosen all 3 screws, removing only one
• align 2 remaining screws with keyhole slots in metal pan of light kit
• insert metal pan over two screws, twisting to locked position
• reinstall single screw that was removed.
Make sure wires are fed through hole in pan.
WARNING: BE SURE TO TURN OFF POWER BEFORE INSTALLING
• loosen wire hold down, move all wires as far from bulb as possible,
retighten wire holddown over 2 wires from fan
• connect 2 wires from fan to 2 wires on light kit (male to female) (female to male)
• install bulb supplied without touching bulb with fingers
• 3 bolts on glass can be inserted into key holes in metal pan
• the glass has to be turned clockwise to lock glass into pan
wire hold down
screws
glass
bulb
