pg. 7
A. DOWNROD MOUNT
• obtain fan and place hemisphere of downrod into mounting bracket
• rotate fan until the slot in the hemisphere locks into the tab of the
mounting bracket
• place looped end of safety cable over the wood screw and flat washer
not previously tightened (in Step 3)
• tighten above wood screw securing the safety cable
3. HOOKING UP SAFETY CABLE
safety
cable
hemisphere
mounting
bracket
safety
cable
tab
slot
hemisphere
mounting
bracket
INSTALLATION
B. FLUSH MOUNT
• obtain fan and align one of the two oblong holes in canopy with the pin on
the mounting bracket.
• hang motor on pin.
• place looped end of safety cable over the wood screw and flat washer
not previously tightened (in step 2).
• tighten above wood screw securing the safety cable.
oblong holes
canopy
pg. 8
This fan is equipped with a canopy type remote control unity for controlling the
fan speeds and light kit. Please refer to the instruction sheet packed with the
control unit for more information about the wiring and installation.
4. ELECTRICAL HOOKUP
INSTALLATION
NOTE:
Once ground wires are connected, carefully tuck wires and marrette into
the metal outlet box making sure that the wires are clear of the hemisphere and
downrod when positioning in the moutning bracket.
*If you want a replacement remote control (CQ002), please contact your dealer
or your customer service 1-800-265-1833
120V SUPPLY CIRCUIT
receiver
blue
black
white
white
black
white
black
gr
ound
gr
een
gr
ound to downr
od
outlet
box
