Canarm AgSystems CYCLONE PLUS, Руководство по установке

Страница: 9 / 19

3 MECHANICAL INSTALLATION P
3.1 BEFORE YOU RAISE THE CYCLO
ROCEDURE
ONE
motor, blades, housing, deflectors, brackets, controls and
W
the cyclone has to be assembled for two direction airflo
4000 AVE. PINARD,
ST-HYACINTHE,
QUÉBEC, CANADA,
J2S 8K4,
TEL: 450-383-4000,
FAX: 450-383-4004
www.ventecventilation.com
d mounting
w (See Fig 4) or for
Inspect and check the belts, sheaves, m
hardware.
3.1.1 DIRECTIONS OF THE AIRFLOW
Locate installation spot and confirm if t
one direction airflow (See Fig. 5).
Figure 4 4 - Cyclone
Plus
assemble
d
for two o directions airflow
Figure 5- Cyclone P
lus
assemble
d
for one e directio
n
airflow
Sept. 8, 2016 PAGE 7 OF 17 REV 4
PUTTING INNOVATION TO WORK
7686 16 Line, Arthur, ON.
N0G 1A0
Email: agsales@canarm.ca
Tel: 1-800-263-5314
Fax: 519-848-3948
www.canarm.com
dǁŽͲǁĂLJĂŝƌĨůŽǁLJĐůŽŶĞWůƵƐƐŚĂůůďĞŝŶƐƚĂůůĞĚůĞǀĞů͘/Ŷ this case, if used with a post bracket (part#: FGCY-MNTKIT) or
a steel post a straight square 4" union is required for this type of mounting.
for one direction airflow, the Cyclone Plus is installed tilted in a 30 degree angle. In this case, if used with a post
bracket or a steel post a square 4" tilted union might be required for this type of mounting.