Canarm AgSystems CYCLONE PLUS, Руководство по установке

Страница: 7 / 19

4000 AVE. PINARD,
ST-HYACINTHE,
QUÉBEC, CANADA,
J2S 8K4,
TEL: 450-383-4000,
FAX: 450-383-4004
www.ventecventilation.com
Sept. 8, 2016 PAGE 5 OF 17 REV 4
1.5 OPTIONAL ELECTRIC COMPONENTS
The Cyclone motor may be single phase or 3 phases according to your order.
Most 3 phase motors are dual Voltage, for most of these motors, Low Voltage means 230Vac and High
Voltage means 460Vac.
We strongly suggest you to install a Variable Speed Drive (VFD) if it is a 3 phase type, in order to achieve the
full performance of the Cyclone fan.
The VFD will allow you to run your fan manually or automatically (when connected to a thermostat) from
low speed (15Hz for 60rpm) to high speed (60Hz for 245rpm).
Visit Canarm.com to view our full offering of controls.
**460VAC drives
are
also availabl
e on demand and
requir
e
th
e
additi
on of
li
ne
reactors.
You can also add one of our temperature controls that can be wired to the VFD and change the speeds based on
temperature, time or humidity.
Visit Canarm.com or c
all our technical support line
1-800-260-5314
for a list of
Canarm
approved controls.
It is
important that co
ntrols are
sized properly fo
r
the amp
loading
of the fan.
ON
ORDERING
,
CUSTOMER MUST SPECIFY TH
E
TYPE
OF
POWE
R
SUPPLY AVAILABL
E
IN
TO
THE FA
RM
IN ORDER
TO
GE
T
TH
E GOOD
MODEL
OF
DR
IVE.
WIRING MUST BE DONE BY
A
CERTIFIE
D
ELECTRICIA
N,
ACCORDIN
G TO
FEDERA
L,
STATE AN
D
LOCA
L
REGULATIONS.
PUTTING INNOVATION TO WORK
7686 16 Line, Arthur, ON.
N0G 1A0
Email: agsales@canarm.ca
Tel: 1-800-263-5314
Fax: 519-848-3948
www.canarm.com