L O N D O N T P 5 0 0
L O N D O N T P 5 0 0
(21)
(20)
Show and Set Time-of-Day
Be sure to set the Time-of-Day
Setting the time-of-day can be important for determining filtration times and other background features.
When in the TIME menu, SET TIME will flash on the display if no time-of-day is set in the memory.
24-hour time display can be set under the PREF menu.
Note:
This note refers to systems that do not keep track of Time-of-Day when powered down.
If power is interrupted to such a system, Time-of-Day is not stored. The system will still operate and all other user settings
will be stored. If filter cycles are required to run at a particular time of day, resetting the clock will return the filter times
to the actual programmed periods.
When such a system starts up, it defaults to 12:00 Noon, so another way to get filter times back to normal is to start up
the spa at noon on any given day. SET TIME will still flash in the TIME Menu until the time is actually set, but since the spa
started at noon, the filter cycles will run as programmed.
Flip (Invert Display)
04-11-09
Restricting Operation
The control can be restricted to prevent unwanted use or temperature adjustments. Locking the panel prevents the controller
from being used, but all automatic functions are still active.
Locking the Temperature allows Jets and other features to be used, but the Set Temperature and other programmed settings
cannot be adjusted.
Temperature Lock allows access to a reduced selection of menu items. These include Set Temperature, FLIP, LOCK, UTIL, INFO
and FALT LOG.
08-06-09
Light Timer
Programming
Light Timer Option
If LITE TIMR does not appear
in the Main Menu, the Light
Timer feature is not enabled
by the manufacturer.
When available, the Light
Timer is OFF by default.
Sub-Menu Detail – Set Light Timer
Unlocking
This Unlock sequence may be used from any screen that may be displayed on a restricted panel. If the panel has both an UP and
a Down button, the ONLY button that will work in the Unlock Sequence is the UP button. The temperature will not Unlock if the
Unlock sequence is done while the panel is displaying “LOCK”.
Sub-Menu Detail – Unlocking the Set Temperature or All Buttons
04-21-09
