Fraser Gazebo - Assembly Instructions
w w w . c a n a d i a n s p a c o m p a n y . c o m
Before you assemble Gazebo:
Access to power and water for Spa* / Gazebo
Before you take delivery of your Fraser Gazebo (and Spa) please take the time to decide where
you want the Gazebo to be positioned with a view to access to electricity and water.
* Photo shows hot tub being filled up through the Filter basket (recommended).
Solid Base
Build a solid base for your Gazebo/Spa to sit on. The overall area should be in excess of 3 x 3
metres plus additional perimeter of 0.5 meter around the outside of the structure.
Gazebo perimeter clearance
Ideally the Gazebo should be positioned at least a metre away from a neighbouring fence or
hedge to allow sufficient space for manoeuvring and assembling the structure.
Orientate Gazebo
Decide how you want your Gazebo to be orientated: Your spa has two ‘louvred sides and two
‘open’ sides, one of the open sides will have the ‘Bar’ attached and the other ‘open side is to
gain entry into the spa. The bar can be positioned between corners A-B, B-C, C-D.
Cover lifter clearance
As you enter the main ‘open’ side of the Gazebo decide in advance if you want your hot tub
cover lifter to open from the ‘left’ or ‘right’ hand side and then make sure you have sufficient
clearance within the structure for ‘lifting’ and closing the spa cover.
PLEASE READ CAREFULLY BEFORE ASSEMBLING GAZEBO
You will need at least 2 people to erect the Gazebo. Please check that you have ALL the parts you need before assembling
the gazebo (DO NOT leave Gazebo parts exposed to extreme heat prior to assembly as some materials may expand)
