background image

EN-Rev IM-FDM-EN/1.6 Copyright © March 2017. Canadian Solar Inc.

10 | 

Table 1: 
Mechanical and Electrical Ratings under STC

Standard Test Conditions are: irradiance of 1 kW/m

2

air mass (AM) spectrum of 1.5, and cell temperature 
of 25°C. The electrical characteristics are respectively 

within ±10 percent or [0; +5 W] of the indicated valu-
es for Isc, Voc and Pmax. Specifications are subject 
to change without notice. 

Module Type

Maximum 

Power

Pmax <W>

Operating

voltage

Vmp <V>

Operating

current

Imp <A>

Open Cir-

cuit Voltage

Voc <V>

Short Circuit 

Current

Isc <A>

Max. Series

Fuse 

Rating <A>

Overall

Dimension

<mm>

Weight

<kg>

CS6K-245P-FG

245

30.0

8.17

37.1

8.74

15

1658ˣ 992 

ˣ 5.8

(65.3 ˣ 39.1 

ˣ 0.23 in)

without 

junction-

box and 

corner 

protector

23

CS6K-250P-FG

250

30.1

8.30

37.2

8.87

CS6K-255P FG

255

30.2

8.43

37.4

9.00

CS6K-260P-FG

260

30.4 

8.56 

37.5 

9.12 

CS6K-265P-FG

265

30.6 

8.66 

37.7 

9.23 

CS6K-270P-FG

270

30.8 

8.75 

37.9 

9.32 

CS6K-275P-FG

275

31.0 

8.88 

38.0 

9.45 

CS6K-280P-FG

280

31.3 

8.95 

38.2 

9.52 

CS6K-285P-FG

285

31.4

9.06

38.3

9.64

CS6K-290P-FG

290

31.6

9.18

38.5

9.72

CS6K-295P-FG

295

31.8

9.28

38.6

9.81

CS6K-300P-FG

300

32.0

9.38

38.8

9.92

CS6K-245M-FG

245

30.3

8.09

37.4

8.61

15

1658ˣ 992 

ˣ 5.8

(65.3 ˣ 39.1 ˣ 

0.23 in)

without 

junction-box 

and corner 

protector

23

CS6K-250M-FG

250

30.4

8.22

37.5

8.74

CS6K-255M-FG

255

30.5

8.35

37.7

8.87

CS6K-260M-FG

260

30.7

8.48

37.8

8.99

CS6K-265M-FG

265

30.9

8.61

37.9

9.11

CS6K-270M-FG

270

31.1

8.67

38.2

9.19

CS6K-275M-FG

275

31.3

8.80

38.3

9.31

cleaning effect). If the module has become soiled, 
it shall be washed with water and a non-abrasive 
cleaning implement (sponge) during the cool part 
of the day. 

Do not 

scrape or rub dry dirt away, as 

this may cause micro scratches.

·  Snow should be removed using a soft brush.

·  The system shall be periodically inspected to verify 

the integrity of all wiring and supports.

·  To protect against electric shock or injury, electrical 

or mechanical inspections and maintenance 

should be performed by qualified personnel only 

and on a regular basis.

·  Please refer to our Installation Manual Annex 

(Section Annex D: Module Cleaning Guideline) for 

more information on module cleaning.

AMENDED EDITIONS

AND DATES

· Rev 1.0 is released in June 2015
· Rev 1.1 is released in Aug. 2015.
· Rev 1.2 is released in January 2016.
· Rev 1.3 is released in May 2016.
· Rev 1.4 is released in June 2016. 
· Rev 1.5 is released in July 2016.
· Rev 1.6 is released in March 2017.

ANNEX A: 

MECHANICAL AND ELECTRICAL RATINGS  

Содержание Dymond CS6K-245P-FG

















Отзывы: