11
10
Model Type
Maximum
power
Pmax<W>
Max. Series
Fuse Rating
<A>
Weight
<Kg>
Overall
Dimension
<mm>
Operating
Voltage
(Vmp) <V>
Open Circuit
Voltage
Voc <V>
Short Circuit
Current
Isc <A>
Operating
current
Imp <A>
CS6X-305M
CS6X-310M
305.0
310.0
36.6
36.7
8.33
8.44
45.2
45.3
8.84
8.95
For older modules, when diameter of the grounding holes is 4mm (INTERTEK certified).
·
qualified by at least one North-American certification body, as specified.
·
For grounding methods A and B, connect module frames to each other using suitable grounding conductor with
ring terminals.
·
A copper terminal ring is recommended (please see below picture for reference). The d2 diameter should be
5.3mm and the size of d1 is determined by the size of the grounding cable. Proper crimping tool and method should
be used to crimp the terminal onto the grounding cable. Once crimped, each terminal should be visually checked
according to the following points:
1.The insulator jacket is correctly crimped in the first collar
2.The conductor core is correctly crimped in the second collar
3.The conductor core does not run over the functional part of
the ring terminal
4.The ring terminal should not be bent or deformed during the
crimping operation.
All the requirements of paragraph 5.2 should apply to the alternative grounding methods. Each method has been
ANNEX B: ALTERNATIVE GROUNDING METHODS
B.1 GROUNDING METHOD A: T Bolt + Ring terminal
·
The grounding hole should be pierced using an adequate tapping tool (M5x0.8mm).
·
Secure to the grounding hole the following: the lug with stainless steel hardware including a pan head bolt
(M5x14mm), a flat washer, a split washer and an hexagonal nut. Two full threads of the bolt shall engage the metal.
·
A torque moment of about 3Nm should be used to fasten the grounding parts to module frame.
When diameter of the grounding holes is 5mm (
INTERTEK
and CSA certified).
·
Connect the grounding hardware to the grounding hole on the frame
as shown in the picture.
·
A K-nut is used to penetrate the frame's anodizing (protective
coating) to create conductive connection.
·
A torque moment of about 3Nm should be used to fasten the
grounding parts to module frame.
B.2 GROUNDING METHOD B: Bolt + K-nut + Ring terminal (copper)
B.3 GROUNDING METHOD C: UGC-1 clips + WEEBlug 6.7
Used in conjonction with SolarMount rails from UNIRAC, no hole is requested (INTERTEK certified).
·
UGC-1 grounding clips are used to create grounding path between the module frame and the UNIRAC rail.
WEEBlug 6.7 assemblies are designed for use with size 6-12 AWG solid copper conductor wire, and allow connecting
the system to equipment ground connector.
Model Type
Maximum
power
Pmax<W>
Max. Series
Fuse Rating
<A>
Weight
<Kg>
Overall
Dimension
<mm>
Operating
Voltage
(Vmp) <V>
Open Circuit
Voltage
Voc <V>
Short Circuit
Current
Isc <A>
Operating
current
Imp <A>
CS6P-255P/PM/PX
CS6P-260P/PM/PX
CS6P-265PM
CS6P-270PM
CS6P-275PM
CS6A-160M
CS6A-165M
CS6A-170M
CS6A-175M
CS6A-180M
CS6A-185M
CS6A-190M/MM
CS6A-195MM
CS6A-200MM
CS6A-205MM
CS6A-210MM
CS6A-215MM
CS6A-135 P/PE
CS6A-140 P/PE
CS6A-145 P/PE
CS6A-150 P/PE
CS6A-155 P/PE
CS6A-160P/PE
CS6A-165P/PE
CS6A-170P/PE
CS6A-175P/PE
CS6A-180P/PE
CS6A-185P/PE
CS6A-190P/PE/PM
CS6A-195PM
CS6A-200PM
CS6A-205PM
CS6A-210PM
CS6A-215PM
CS6X-250P
CS6X-255P
CS6X-260P
CS6X-265P
CS6X-270P
CS6X-275P
CS6X-280P
CS6X-285P
CS6X-290P
CS6X-295P
CS6X-300P
CS6X-305P
CS6X-260M
CS6X-265M
CS6X-270M
CS6X-275M
CS6X-280M
CS6X-285M
CS6X-290M
CS6X-295M
CS6X-300M
255.0
260.0
265.0
270.0
275
160.0
165.0
170.0
175.0
180.0
185.0
190.0
195.0
200.0
205.0
210.0
215.0
135.0
140.0
145.0
150.0
155.0
160.0
165.0
170.0
175.0
180.0
185.0
190.0
195.0
200.0
205.0
210.0
215.0
250.0
255.0
260.0
265.0
270.0
275.0
280.0
285.0
290.0
295.0
300.0
305.0
260.0
265.0
270.0
275.0
280.0
285.0
290.0
295.0
300.0
30.2
30.4
30.6
30.8
31.0
23.3
23.4
23.5
23.6
23.8
23.9
24.1
24.2
24.3
24.5
24.6
24.7
22.3
22.5
22.6
22.9
23.9
23.1
23.1
23.2
23.4
23.5
23.7
23.9
24.0
24.1
24.2
24.3
24.5
34.7
34.8
34.9
35.1
35.3
35.5
35.6
35.8
35.9
36.0
36.1
36.3
35.3
35.5
35.6
35.8
36.0
36.1
36.3
36.4
36.5
8.43
8.56
8.66
8.75
8.88
6.86
7.06
7.24
7.41
7.58
7.74
7.87
8.04
8.22
8.38
8.54
8.7
6.05
6.21
6.41
6.56
6.76
6.93
7.13
7.32
7.49
7.65
7.82
7.95
8.13
8.30
8.47
8.63
8.78
7.21
7.33
7.45
7.55
7.65
7.76
7.86
7.96
8.08
8.19
8.30
8.41
7.37
7.47
7.58
7.68
7.78
7.89
8.00
8.11
8.22
9.00
9.12
9.23
9.32
9.45
7.56
7.71
7.80
7.92
8.07
8.26
8.38
8.56
8.74
8.90
9.06
9.22
6.82
7.00
7.19
7.35
7.51
7.67
7.82
7.92
8.04
8.19
8.39
8.50
8.69
8.87
9.03
9.19
9.35
7.85
7.95
8.04
8.10
8.19
8.31
8.42
8.53
8.64
8.76
8.87
8.97
7.92
7.98
8.07
8.19
8.30
8.40
8.51
8.63
8.74
37.4
37.5
37.7
37.9
38.0
29.2
29.2
29.4
29.5
29.6
29.7
29.8
29.9
30.0
30.2
30.3
30.4
28.5
28.6
28.7
28.8
28.8
28.9
29.0
29.2
29.3
29.4
29.4
29.6
29.6
29.8
29.9
30.0
30.2
43.6
43.7
43.8
43.9
44.1
44.1
44.2
44.3
44.4
44.5
44.6
44.8
44.1
44.3
44.4
44.5
44.6
44.7
44.7
44.9
45.0
15.00
15.30
(Standard)
or
15.50
(MM only)
1324X982X40
15.00
1324X982X40
15.30
(Standard)
or
15.50
(PM only)
27.00
(4mm
Glass)
or
23.00
(3.2mm
Glass)
1954×982×40
27.00
(4mm
Glass)
or
23.00
(3.2mm
Glass)
1954×982×40
15.00
15.00
EN-Rev 2.3 Copyright 20
Canadian Solar Inc.
12 Sep.
EN-Rev 2.3 Copyright 20
Canadian Solar Inc.
12 Sep.
QUALITY I VALUE I INNOVATION
QUALITY I VALUE I INNOVATION