L1-7
2nd
1st
STEP 10
Secure all slats in the right order underneath the low back support (D). Use
one 4x40 mm screw per slat. Do not tighten the topmost screws yet. First,
spread out all the slats so that they form a nice curve at the top and so that
they are evenly spaced. Use the notches as reference points. When all slats
are correctly positioned, the last 4x40 mm screws can be tightened up.
STEP 11
Take the remaining slat (M) and place it in the notch at the back of the seat,
with the curved side facing the back of the seat. Secure it using a 1½-inch
screw on each side. The countersunk edges of the holes should face
upwards.
Relax and enjoy that Comfy Chair feeling to the full!
Comfy Chair
Oosterbrinkweg 5
3774 BW Kootwijkerbroek
The Netherlands
Tel: +31 (0) 6 105 929 65
Tel: +31 (0)342-443186
|
www.comfychair.nl
