6 Installation
6 Installation
WARNING!
Danger to life due to electric shock.
Operation of the device only intended on 24V DC voltage (safety extra-low
voltage)
Death and serious injuries as well as considerable property damage can be the
result.
→ Connection of the device may only be carried out by an electrician in
accordance with IEC 60364!
→ Do not connect this equipment directly to other networks!
→ Observe five safety rules! See chapter 2.1
CAUTION!
Electromagnetic interference!
Uncontrolled processes and damage due to disturbed data transmission!
→ Observe the chapter
Improving EMC resistance 8.1 during all installation steps.
NOTE
Connected cables must be approved for 60°C.
6.1 Power supply connection
WARNING!
Fire hazard due to short circuit!
Supply lines and/or modules damaged by short circuits can overheat and cause
fires!
→ Provide intelligent current monitoring and fuse. The fuse protection must be
designed for max. 2A.
ATTENTION!
Electromagnetic interference due to incorrect voltage supply!
Electromagnetic interference may occur if rated operating voltages other than
24 V DC of the SELV (safety extra low voltage) category are used.
→ Only use power supplies that comply with the SELV category.
→Note technical data
Manual
DATAEAGLE 6000 Series - Wireless CAN
33
Содержание DATAEAGLE 6000 Series
Страница 2: ...Manual DATAEAGLE 6000 Series Wireless CAN 2...
Страница 61: ......