Can-Am Spyder RT 2019, Руководство оператора

Страница: 166 / 187

US EPA EMISSIONS PERFORMANCE WARRANTY
BRP warrants that if:
1. The Product is maintained and operated in accordance with the written instruc-
tions for proper maintenance and use, and
2. The Product fails to conform at any time during its useful life to the applicable
emission standards or family emission limits as determined by an EPA-ap-
proved emission test, and
3. Such nonconformity results or will result in the Product owner having to
bear any penalty or other sanction (including the denial of the right to use
the Product) under local, State or Federal law, then BRP shall remedy the
nonconformity at no cost to the owner; except that, if the Product has been in
operation for more than 5 years or 30,000 kilometers (18,641 miles). BRP shall
be required to remedy only those nonconformities resulting from the failure
of components which have been installed in or on the Product for the sole or
primary purpose of reducing Product emissions and that were not in general
use prior to model year 1968.
The warranty period begins on the date the Product is delivered to its ultimate pur-
chase, or if the Product is first placed in service as a “demonstrator” or “company”
motorcycle prior to delivery, on the date it is first placed first placed in service.
Items which are covered by the Emissions Performance Warranty for the full use-
ful life of the Product:
Fuel System and Air Admission Systems
– Fuel Injectors, Fuel Pump Module, Fuel Filter Ass’y, Throttle Body (Including
Throttle Position Sensor), Air Intake Manifold
Ignition Components and Sensors
– Engine Control Module (ECM), Engine Wiring Harness, Ignition Coils, Spark
Plugs (covered only up to the first maintenance replacement), Noise Sensor
(Knock Sensor), Camshaft Position Sensor, Crankshaft Position Sensor, Tem-
perature Sensor (Coolant), Pressure And Temperature Sensor, Oxygen Sensors
Exhaust System
– Primary Muffler (Containing Catalytic Converter), Exhaust Manifolds
– Clamps, Gaskets and Seals (from Engine up to Primary Muffler)
Crankcase Ventilation System
– Crankcase Vent Breather, Crankcase Vent Hose, Oil Filler Cap
Evaporative Emission Control System
– Fuel Tank, Fuel Cap, Fuel Hose, Vapor Canister, Vapor Canister Mounting
Bracket, Bleed Valve (Purge Valve), Check Valve, Filters, Evaporative Compo-
nents Mounting Brackets
– Clamp, Seal, Gasket and Fitting (associated with fuel system assembly)
See maintenance information section in this operator’s guide for proper mainte-
nance. This operator’s guide contains information for proper use of the Product.
Under the Emissions Performance Warranty, BRP shall be liable for the total cost of
the remedy for any Product validly presented for repair to any authorized Can-Am
On-Road dealer, unless for emergency repairs as required by item 2 of the follow-
ing list. State or local limitations as to the extent of the penalty or sanction imposed
upon an owner of a failed Product shall have no bearing on this liability.
164
______________