Can-Am Spyder RT 2019, Руководство оператора

Страница: 123 / 187

MAINTENANCE PROCEDURES
1 A B
2
rbl2015-005-005_a
TYPICAL HEADLIGHT REFLECTION ON TEST
SURFACE (BOTH HEADLIGHTS)
1. Ground
2. Top line
A. 703 mm (27-11/16 in)
B. 773 mm (30-7/16 in)
Verifying the Headlights Aiming
(European, Australian and Japanese
Models)
Low Beam
NOTE: This verification is valid for ei-
ther left-hand or right-hand traffic regu-
lations.
1. Verify that the tires are correctly in-
flated.
2. Set the rear suspension air pressure
to 0 kPa (0 PSI) using the schrader
valve located under the seat.
rmo2016-006-007_b
1. Schrader valve
3. Position vehicle in front of a test sur-
face as shown. Make sure vehicle is
on leveled ground.
rmo2010-001-007_b
A. 10 m (33 ft)
90°
rmo2010-001-008_a
4. Trace 4 lines parallel to the ground
on the test surface as follows:
LINES ON THE TEST SURFACE
Line A
703 mm (27-11/16 in)
above ground
Line B
773 mm (30-7/16 in)
above ground
Line C
566 mm (2-9/32 in) above
ground
Line D
370 mm (14-9/16 in)
above ground
5. Select low beam.
6. Beam aiming is correct when the
top line of the headlight reflection is
between lines C and D.
______________
121