Can-Am Commander Electric LSV, Руководство оператора

Страница: 15 / 114

PRE-RIDE INSPECTION
Always inspect and confirm the safe operating condition of your vehicle prior to
ride. Always follow the maintenance schedule described in this Operator's Guide.
WARNING
Perform a pre-ride inspection before each ride to detect any potential prob-
lem that could occur during operation. The pre-ride inspection can help you
monitor component wear and deterioration before they become a problem.
Correct any problem that you discover to reduce the risk of a breakdown or
crash. See an authorized Can-Am dealer as necessary.
Before using this vehicle, the operator should always perform the following
pre-ride inspection check list.
Pre-Ride Inspection Check List
Items to be Checked in Key OFF Position
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Charging cable Verify charging cable is disconnected from power outlet.
Tires
Check tire pressure and condition. Refer to vehicle label or
SPECIFICATIONS
in this guide.
Wheels
Check wheels and lug nuts for damage.
Drive shaft boots Check drive shaft boots and protectors condition.
Cargo Load: If you transport a cargo, respect
the maximum load capacity according to your
vehicle and its equipment. Ensure cargo
is properly secured to the rear cargo box.
Vehicle Load: Ensure that total load on the vehicle does
not exceed specifications.
Cargo and load
If you are pulling a trailer or another equipment:
– Check hitch and trailer ball condition.
– Respect the tongue capacity and towing capacity.
– Ensure trailer is properly secured to hitch.
Check if the cargo box is properly latched.
Rear cargo box
Check if both tail gates are properly latched.
Chassis and
suspension
Check underneath vehicle for any debris on chassis or
suspension and clean them properly.
12
_______
SAFETY INFORMATION
________