CAMTREE Hunt FS-700 Cage kit 4
Attach the top plate with handle to
the camera and secure it properly
with the provided allen bolts.
Note
:You can also attach other accessories to the top plate as per your requirement
Now attach the cage bracket with the top & base plate and secure it properly with the
provided allen bolts as shown in the images below.
Insert both 100mm rods at rear of the rod clamp of the camera base plate.Now, insert your
shoulder pad into 100mm rods and tighten the knobs properly to secure the shoulder pad
and the rod system.
Note:
if you have purchased rig/kit then you have to attached 300mm rods instead of 150mm
rods.
Insert 2X 300mm long rods into front
of the rod clamp of FS-700 camera
base plate and tighten the knobs
properly to secure the rods.
