HSEUiREG07201(R2) MANUAL
Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany
P.2/15 (03/2017.02.2)
Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77
www.camtec-gmbh.com
-
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
Technical description
The Camtec HSEUiREG models are high-precision lab power supplies „Made in Germany“. These
power supplies are designed for power systems in the testing automation.
For more than 25 years the Camtec Power Supplies manufactures high-end switch mode power supplies in
Germany. A field breakdown of below 0,004% over a 10-year period under review approves our ambitious
quality concept. Each manufactured Camtec product passes several 100% tests for each detailed function and
a full-load Burn-In test.
Although it is not required from the safety norms our production applies a routine safety test to each
manufactured device, even if it is an extra low-voltage model. The components in the assembled device pass
stress aging to achieve an even level and to prevent from delayed failures. Our internal product engineering
guidelines provide a clear target: Camtec product reputation must say „mount and forget“. Quality is never a
mere promise for our team.
The HSEUiREG laboratory power supplies provide low noise and ripple, a very quick programming, and a
precise setting at high load changes. With an efficiency up to 90% the devices are highly energy efficient.
Equipped with high-end capacitors of outstanding lifetime our power supplies guarantee a very long and
reliable operation time. The circuit design of the HSEUiREG Series allows cope playing with complex loads.
The internal protection circuits protect the power supply and the connected system, even in exceptional
situations. The HSEUiREG series is protected from high transients by strong filters with high energy efficiency.
All inputs and outputs are electrically isolated. The design specifications call for the highest standards of safety
and interference suppression. The unit is designed in accordance with the EN61010-1, EN61010-2-201,
EN62368-1, EN60950-1, and the EMC-compatibility with EN55032.
The special heat emission design supports easy baseplate cooling with the help of an optional wall mount
plate.
