CAMSPORTS HDMax - User Manual - English
4
Quick Start:
-
Always operate your CAMSPORTS in a safe place and in safe conditions for you and for
others
-
Choose the appropriate mount and ensure it is fitted securely and tightly so that it can not
come loose while shooting your videos.
-
Press
[
⊙
]
key and hold for 2 seconds to power up the camera.
-
Adjust the lens to the proper angle.
a) Face a blank surface and press the laser button to turn on the lasers ( The lasers will
disappear in 15 seconds). The laser can be turned on or off at any time with the laser light
button.
b) Check whether the laser light is horizontally aligned. If not, rotate the lens until it is in the
horizontal state.
The indicator light glows green to indicate standby mode.
-
Start / stop recording
a) Slide the recording switch forward. The recording indicator ( red ) turns on and flashes
while camera beeps (These audio beeps can be turned off in the menu), and camera is
recording .
b) To stop recording, slide the switch backwards, the recording indicator turns off and the
camera beeps and stops recording.
With the LCD screen constantly on the battery will only last for approximately 30 minutes.
By pressing the LCD button
[
⊙
]
the screen will turn off and then the battery will last for 2-
3 hours. By pressing the LCD button
[
⊙
]
for 2 seconds the camera will completely turn off.
Start / stop recording by the remote controller (HDMax Extreme)
-
Press
[
⊙
]
key ( hold for 2 seconds ) to power up the camera.
-
Connect wired remote to the DIGITAL interface of camera
-
Press
【
REC
】
key on the wired remote to start recording, recording indicator ( red )
turns on and flashes when it is recording.
-
During recording, press
【
REC
】
key on wired remote again to stop, and recording
indicator turns off when camera stops recording.
Picture shooting instructions
In standby mode (no video recording) , press the front key to take photos.
The picture size is 2560 x 1920 pixels.
