CAMSPORTS HDMax - User Manual - English
3
Mounts
-
A .Cradle: with two 1/4 tripod threads fitted for use with other mounts as shown below, this
camera can be widely used with any equipment and any application.
-
B. Goggle Strap Mount: can be fixed on to your goggle strap and any other elastic band or
strap.
-
C. Flat Mount: With a high performance, waterproof and heat-resistant 3M sticker at the
back, it is ideal for flat, non-porous surfaces.
-
D. Bar Mount: with 3 sizes of rubber, the camera can be mounted on to the tubes of
mountain bike handle bars, roll bar cages etc.
-
E: Vented Helmet Mount, with the Velcro strap is ideal for mounting the camera to various
styles of vented helmets.
Installing the battery
-
Slide the lock on the rear cover and it will
automatically open. (1)
-
Follow the instructions. Insert the battery with
the correct Polarity (+/-)
-
Push the rear cover closed. (2)
-
NOTE: If you do not intend to use the produc for
a long time, please remove the battery.
-
Batteries contain chemical substances so they
should be handled and disposed of correctly.
Installing the micro-SD card
-
Slide the lock on the rear cover and it will
automatically open. (Refer to picture4)
-
Follow the instructions. Insert the SD card in
the correct direction. (Refer to picture 5)
-
Push the back cover to the closed position.
(Please refer to picture6)
Note: The HDMax requires a class 4 or above SD
card to operate correctly. Most faults with
operating cameras are because a cheap SD card is
used. Choose additional SD cards with care.
Installing the mounts
Fix the mounts to the camera in the correct direction.
Using the screw cap to fix the mount to the 1/4 thread of camera (Or it can be fixed on other 1/4
tread mounts.
Slide any mount of B/C/D/E into the holder of “A” mount.
Make sure the mount locks in firmly to avoid the cradle sliding out of the mount during operation.
