Camsat CDS-5IPmini, Руководство пользователя

Страница: 8 / 23

SYSTEM
Basic Settings (device name and region settings)
Network Settings (settings of the wireless system operation mode and IP address)
Time Settings (time settings, NTP server settings)
WIRELESS
Basic Settings (basic configuration of the wireless connection: operating mode, chan -
nel, output power)
Security Settings (safety settings, transmission coding)
Advanced Settings (advanced settings of the wireless connection)
WDS Settings (WDS settings related to the recommended operation mode: Bridge)
MANAGEMENT
Password Settings (access data settings)
Firmware Upgrade (firmware update – for advanced users)
Configuration File (saving and loading of the module configuration and resetting the
module to its factory settings)
TOOLS
System Log (history of changes/logging on the CDS-5IPmini module)
4. Module assembly on the pole:
Reverse the CDS-5IPmini unit. Insert the mounting clamps intended for the module
assembly on the pole into appropriate openings in the rear part of the device body.
Remember to loosen the mounting clamps with a screwdriver before pushing them
through the openings in the device body.
Stably fix the CDS-5IPmini module to the pole, firmly tightening the bolts of the moun -
ting clamps. The clamps are suitable for the assembly on poles with diameters between
32 and 70 mm.
While installing units on outdoor poles, make sure to use overvoltage protection
for Ethernet cables. The pole must be earthed unconditionally. Failure to observe
these guidelines may result in damaging the equipment during lightning strikes.
This type of damage is not covered by the warranty.
7
EU EU
POLISH
MARK
POLISH
MARK
CDS-5IP
MINI
User Guide