
3
mg1700
ENG
BEFORE USING
Read these instructions thoroughly first and keep them for future reference. Check
whether the voltage in the hone corresponds with that of the appliance. Only connect this
appliance to an earthed electric socket.
Remove all packaging materials and stickers from the appliance. Clean the appliance and
all removable accessories and dry them thoroughly (see ’Cleaning and maintenance’).Place
the motor unit on a flat and stable surface.
PARTS
1. Pusher
2. Tray
3. Fixity keystoke
4. Body
5. Handle
6. Switch
7. Screw pusher
8. “T” Piece
9. Plastic sheath 01
10. Plastic sheath 02
11. Revolve knife
12. Middle hole knife
13. Fixation nut
14. Long sheath
15. Short sheath
HOW TO USE
Mincing
See below figure 2