Camplux FT30IB, Инструкция по установке и эксплуатации

Страница: 16 / 20

Visit Us: Camplux.com
support@camplux.com
3330-A Marathon Ct Charleston, SC 29418
1(844) 538-7475
15
www.camplux.com
FOR YOUR SAFETY
● Do NOT touch or move fire table for at least 45 minutes after use.
● Reflector is hot to the touch.
● Allow reflector to cool before touching.
WARNING
TIP:
Use high-quality automobile wax to help maintain the appearance
of your fire table. Apply to exterior surfaces from the pole down.
Do not apply to emitter screen or domes.
Care And Maintenance
To enjoy years of outstanding performance from your fire table, make sure you perform the following maintenance
activities on a regular basis:
Keep exterior surfaces clean.
● Use warm soapy water for cleaning. Never use flammable or corrosive cleaning agents.
● While cleaning your unit, be sure to keep the area around the burner dry at all times. Do not submerge the
control valve assembly. If the gas control is submerged in water, do NOT use it. It must be replaced.
a. Keep the appliance area clear and free from combustible materials, gasoline and other flammable vapors and
liquids.
b. Do not obstruct the flow of combustion and ventilation air.
c. Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris.
● Air flow must be unobstructed. Keep controls, burner, and circulating air passageways clean. Signs of possible
blockage include:
a. Gas odor with extreme yellow tipping of flame.
b. Fire table does NOT reach the desired temperature.
c. Fire table glow is excessively uneven.
d. Fire table makes popping noises.
e. Spiders and insects can nest in burner or orifices. This dangerous condition can damage fire table and render
it unsafe for use. Clean burner holes by using a heavy-duty pipe cleaner. Compressed air may help clear
away smaller particles.
f. Carbon deposits may create a fire hazard. Clean dome and burner screen with warm soapy water if any
carbon deposits develop.
Note:
In a salt-air environment (such as near an ocean), corrosion occurs more quickly than normal.
Frequently check for corroded areas and repair them promptly.
Storage
Between uses:
● Turn Control Knob OFF.
● Disconnect LP source.
● Store fire table upright in an area sheltered from direct contact with inclement weather (such as rain, sleet, hail,
snow, dust and debris).
● If desired, cover fire table to protect exterior surfaces and to help prevent build-up in air passages.
Note: Wait until fire table is cool before covering.