Camplux CA528, Инструкция по использованию и уходу

Страница: 26 / 44

www.camplux.com
25
INSULATION BLANKETS
WARNING: If local codes require external application of insulation blanket kits the manufacturer’s
instructions included with the kit must be carefully followed.
Insulation blankets, available to the general public, for external use on gas water heaters are not necessary. The
purpose of an insulation blanket is to reduce the standby heat loss encountered with storage tank heaters. This
water heater does not store water making an insulation blanket unnecessary.
The manufacturer’s warranty does not cover any damage or defect caused by installation, attachment or use of
any type of energy saving or other unapproved devices (other than those authorized by the manufacturer)
into, onto or in conjunction with the water heater.
The use of unauthorized energy saving devices may shorten the life of the water heater and may endanger life
and property.
The manufacturer disclaims any responsibility for such loss or injury resulting from the use of such
unauthorized devices.
PIPE INSTALLATION
Inlet Pipe and Outlet Pipe Installation. Use pressure resistant pipe to connect the inlet and outlet water pipes of
the water heater and the local water pipe (Make sure to place the rubber ring).Before connecting the inlet
water pipe, flush the inside of the pipe.
Hot and Cold Pipe Insulation Installation .For increased energy efficiency, use pipe insulation. Please install the
insulation, according to the illustrations above, making sure to insulate all the way to the top. Do not cover any
drain or pressure valve(s).
Visit Us: Camplux.com
support@camplux.com
3330-A Marathon Ct Charleston, SC 29418
(844) 538-7475